How To Staining Hardwood Floors
Staining hardwood floors – A stained oak hardwood floor adds new color, protection and highlights the beauty of the wood grain and texture. Soil stains are available in an almost unlimited range of colors and can be applied with standard painting tools or, for larger areas, floor polishing machines to the coloration of the discs. Use a brush to remove any dirt or debris from the area to be dyed. Fill a bread roll with stain and use a paint roller to spread on the floor, using long, smooth strokes. Keep the roller saturated with dip dyeing often in the pan; Apply liberally dye. Covering an area of 6 feet by 6 feet at a time.
Use clean rags to clean the soiled surface in a back and forth motion to remove excess stain and even coverage. Use rubber gloves to protect your hands. Repeat steps 2 and 3 to cover the entire floor. Tips and warnings. Several spots produce a range of results based on the type and color of the ground. Before starting staining hardwood floors, you should test the color of the stain on a small piece of scrap.
Multilayer dye can be added to soil to improve the tone staining hardwood floors, but each layer should be dried for a minimum of 24 hours before the next layer. To complete the protective finish of oak flooring, conditioner or polyurethane should be applied to increase durability and protection. Some makeup products contain toxic chemicals and must be careful to protect skin and eyes, as well as making sure the area is well ventilated.